Choice of Frames and Glass |
|
For frame profiles please check out the conservatory spec. |
|
| System PremiLine |
The PremiLine system is the latest generation of sliding profiles that joins the best design with the latest technology. |
|
This system, used in doors and Windows, has great versatility and resistance, stressing the high quality of its performance. Even with large size and weight glass panels, its gliding is surprisingly light and easy. The design of double chamfered leaf profile combines perfectly with all kinds of decorations
•Windows and sliding doors that allow large glazed surfaces.
•It supports a glazing from 4 mm to 28 mm in thickness.
•Compatible with all standard 70 mm systems and the Rolaplus receiver.
•Facilities for individual mounting in the work itself.
•Travel easy and quiet.
•Attractive design based on profiles of leaves with double bevel.
•High quality stainless steel rails.
•Glazing tilted for better internal frame drainage.
•Additional modules to increase the inertia. |
 |
| SF3 system |
The SF3 slide comes to respond to the traditional market of the sliding window. It has good technical performance and tight budget levels.
Designed for Windows of 2, 3 or 4 leaves, has lighter sections that optimize this type of opening, allowing a wide range of glazing and design alternatives and the possibility of integrating fixed, capialzados, edgeboard, extenders, profiles of auction, etc.
The framework of the SF3 (1397) slide has three Chambers and 58 mm of depth, which makes it compatible with the practicable system Eurodur 3S, capialzados, edgeboard, extenders, etc. Profile sheet (1396) can accommodate up to 20 mm thick glass.
All the major profiles are reinforced with steel. This system allows to manufacture Windows with maximum dimensions of sheet below.
|
|
|
-
Slimmer, lighter profiels optimise material usage for this window type.
Subject to the number of sashes, various design alternatives permit a maximum size of 3600 mm x 1400 mm.
Frame depth of 58 mm, allowing easy combination with all profiles of the SF3 system, e.g. coupling angle or extension profiles.
Possibility of integrating fixed lights within the same frame.
Different types of glass, e.g. security glass of up to a max. of 20 mm thickness can be installed.
|
 |
 |
| System GlassWin |
GlassWin is the latest generation of PVC systems. Lightweight profiles can be integrated in the most avant-garde designs of the current architecture, but with great stability and impact resistance.
With the system of GlassWin profiles, glass, frame and leaf remain in the same plane and form a compact structure of glass, where the sheet is hidden in sight. The powerful adhesive sheet and glass strengthens the structure without adding metal parts, allowing a lighter design.
In addition, GlassWin allows you to create large structures with the best levels of insulation glass. |
|
•New narrower design
•Allows you to create large structures of glass
•Functionality and high stability
•Great heat insulation Um = 1, 3W/m2K
• Construction multi-camera
•You do not need metal reinforcements
•You do not need maintenance
•Bicolor profile of 70 mm |
 |
|
|
|
Acoustic Laminated Glass |
|
| |
Glass laminating acoustic offers the best combination of safety and comfort. Use as an acoustic polyvinyl butyral intercalary makes a known properties of a glass security laminate normal are you an exceptional acoustic insulation, thus helping to create a comfortable and protected environment.
Its main features are:
• It provides improved acoustic insulation to reduce the power of the wavelength of sound.
•Behavior of safety against breakage.
•Excellent optical properties (clarity, transparency), given its high light transmission.
•It can be processed as a conventional laminated safety glass. |
 |
|
One of the latest technological advances in the field of the glass are the so-called self cleaning glass, i.e., those that maintain their level of original cleaning with minimal maintenance and rare. The development of such glass is justified if we take into account the high costs and heavy procedures associated with the cleaning of glass in buildings, as well as the annoying chores neceserias to maintain household glass cleaner. The technology that enabled the development of these glasses is virtually the same as the glass of coating type under outbound, solar control, etc.
BIOCID is a glass float coated pyrolytic low optical reflection and neutral appearance that performs a function autolimpialbe with the dioxide of titanium fotocálítico in the layer. This layer is also hydrophilic properties, which helps the water to distribute uniformly on the surface of the glass to form a thin film that takes the suciead and dries quickly without leaving unsightly spots of drying.
|
 |
|
CLIMAGLAS is double glazing thermal insulating, composed of two or more glasses of perfect planimetry and optical quality, separated by profiles of anodized aluminum, filled with an absorbent substance of humidity of the air contained in the sealed Chamber with glass. The two glass are linked to the separator profile by two separate strands of butyl constituting the first barrier of tightness. The second barrier sealant is a filling of polysulfide injected under pressure between the outer edge of the tab context and the two edges of the glass.
Enter less heat in summer (mounted, nice atmosphere savings)
Get less heat in the winter (heating savings, prevents internal condensation).
It controls and regulates the passage of the light according to the needs of the building. |
 |
|
CONTRALUX SUN: Solar control glass
Solar control glass greatly reduces transfers heat received from abroad, achieving significant energy savings and allowing a more comfortable stay, even in areas close to the window.
To differentiate the thermal performance of another solar control glass, we use the following definitions:
The transmission Luminosa: consists of the light energy transmitted by the glass to the incident flux.
Light reflection: The amount of light energy reflected from the glass in relation to the incident flux.
Solar Factor: is the relationship between the total energy that enters a building through the glazing and the incident solar energy. |
 |
|
Safety in use (UNE-EN 12600)
This concept includes aspects relating to the insurance should be a glass when it is placed and is capable of receiving an impact of a person. Therefore refers to its resistance to the impact of a soft body, its form of break and the possibility of producing importanci courts, as well as stay or not in the hole once broken. Rule sets three parameters to classify glass: the fall height (1 = 1200 mm, 2 = 450 mm, 3 = 190 mm), form of break (B = laminated glass) and maximum height without breaking (1 = 1200 mm, 2 = 450 mm, 3 = 190 mm). In general all glass laminates with a single 0.38 mm polyvinyl butyral are classified 2B2 and 2 or more butyrales are all maximum 1B1 classification.
Anti-Agresión (UNE-EN 356)
The characteristics necessary to withstand deliberate attacks of diverse account lumped together under this heading. So are including different types of aggression and with different goals: intentional release of objects, vandalism, theft, personal aggression aggression,... We must therefore consider varying degrees of protection for different types of attack, which act as retarders or dificultadores of the aggression, but have a limit and in the end they can surrender. Obviously these glasses are broken, but remain in their accommodation without letting thereby, provided that glass installed in carpentry who have, for if same, adequate resistance which is for the whole. The potential for these types of glass classifications are: P1A, P2A, P3A, P4A, P5A P6B, q7b and P8B, and go from smaller to greater protection:
•P1A = 3 impacts on triangle from 1500 mm high
•P2A = 3 impacts on triangle from 3000 mm high
•P3A = 3 impacts on triangle from 6000 mm high
•P4A = 3 impacts on triangle from 9000 mm high
•P5A = 9 triangle from 9000 mm high impacts
•P6B = 30 to 50 strokes of axe without opening step
•Q7b = 51 to 70 strokes of axe without opening step
•P8B = more than 71 axe blows without gaining
Anti-Bala (UNE-EN 1063)
It is giving protection against attacks with firearms either with projectiles in a single mass (bullets) as the number (relay) whereas different weapons (pistol, revolver, rifles, shotguns) and calibers, bearing in mind that the projectile does not pot the glazing and the possibility of screening of shrapnel into the protected area. It is the user who must assess the needs of protection, including the psychological bearing in mind that the glazing must be installed correctly on a suitable frame. Carried out two different classifications in function to use shotgun or rifle on the one hand (BR) and short weapon on the other hand (SG).
The classification against small arms and rifle is made in 7 categories BR1, BR2, BR3, BR4, BR5, BR6 and BR7 depending on the weapon and ammunition used
The classification against weapons of the type shotgun is made in two niviles SG1 and SG2
Big resistant (UNE-EN 13541)
With this name we refer to the glass resistant to the pressure of explosion produced intentionally or not. I.e. those that are intended to withstand the shock of the blast and damage caused by the same persons taking into account the projection or not of shrapnel into the protected area. Glass break and deform absorbing the energy generated by the explosion itself. The explosions that can occur are of very different size so it is necessary to establish different levels of protection, which must be taken into account in addition to the glass installation type and dimensions of the same. 4 Tier protection: ER1, ER2 ER3 ER4 and. These classes differ in supported by glass pressure, where the glass will break but remain in their accommodation.
|
|
|
Matt etched glass
A glass Matt acid has an excellent surface finish, which facilitates cleaning while avoiding the frequent problem of fingerprint printing with its quality.
Making it part of a float glass of top quality on which applies an acído that it dissolves part of the glass. This creates a granulated surface that disperses the light and turns transparent float glass in a translucent glass.
This glass becomes the perfect ally for the latest trends in interior design and architecture, to enjoy an extensive field of attractive applications for homes, offices, shops, ect….
Elegance and lightness to the modern decor. It helps to create clear spaces
|
 |
|
Tempered Glass
After receiving a central impact, a normal glass breaks without creating a very definite structure knives that leave from the center.
Tempered glass is cracked into tiny pieces that minimize the risk of injury
Mechanical Properties
• Impact resistance: A moon SECURCID of 8 / 10 mm. thickness is capable of withstanding the shock of a steel ball of 500 grams in free fall from a distance of 2 meters.
• Tensile strength: Approximately 1000 Kg/cm2.
• Flexural Strength: The tensile strength varies from 1200 2000 Kg/cm2.
• Torsional: the break occurs at an angle of 27 degrees equivalent to 180 pounds of torque. According to a study performed in volume of 100 × 33 cm. and 6 mm. thick
• Compressive strength: We need about 10,000 kg/cm2.
weight for spraying a cube of 1 cm. side.
|
 |
